Agilent Keysight N9020a Mxa Signal Spectrum Noise Figure Vector Analyzer NFA

Agilent N9020A MXA Signal Analyzer, 20Hz - 3.6 ghz ~ Loaded w/Opts and CALIBRATED!

Why the small price increase? These are becoming more rare and more rare and nearly impossible to find maxed out with all the options like you could months ago where there were tons available . I guess the price was so good they jumped off the shelves! So get it while you can. I'm guessing in a few months they'll be all sold out or too expensive to be reasonably priced, in fact my source keeps raising 100$ per week lately it's been so bad.

All the other sellers will confirm this .

We also have a few different flavors of these mxa models , some in 26.5 and 8 ghz flavors with similar option configs but those two have really gone up lately . Let me know if interested .

In summary this machine functions every bit as the following :

A spectrum analyzer

An emc analyzer for emissions

A phase noise messurement machine

A noise figure analyzer aka NFE(noise source can be included for an extra 400$ with data) this has the coveted opt p03 preamp needed for nf measurements !

(We also sell a 26.9 GHz noise figure measurement spectrum analyzer system the 8593e if interested, find me online it's easy ;) That sells with an external 20 GHz preamp as well)

Also included on this one:

A mobile communications analyzer

A vector signal analyzer (vsa) like a rohde fsq

This is an equivalent to any of the same era noise figure analyzer systems as the menus are all basically the same and since this has both the measurement software plus the advanced noise figure capability options, it works every bit as good as the N series etc,,,

All those have is a preamp to reduce noise floor which this also has!

This also functions as a full fledged emc measurement system thanks to its option : emc application as well. And we sell a 26.9ghz EMC measurement analyzer that does spectrum analysis as well just as well 8593e/em . Find us for more info on that and major discounts! ;)

This is also equivalent to the higher end signal analyzers due to its blazing performance in speed,phase noise, danl, etc… plus having all the best measurement app options installed like vector analysis/Iq/digital and analog demodulation, wimax varieties, bluetooth, a bunch of wireless communications standards, phase noise measurements that calculate in only a seconds ! Also advanced noise figure utility, basic, emc analyzer function, and the list goes on!

We got a few if these from a big wireless communications auction so theyre packed to the brim with all the standards as shown in pics!

Description:

Accelerate in wireless with the N9020A MXA.

The N9020A MXA is designed to accelerate the development of new wireless devices for quick delivery to manufacturing and the marketplace. It has the versatility to easily adapt to your evolving test requirements by addressing multiple formats, generations and devices.

Real-time spectrum analyzer capability can be added as an upgrade to new and existing MXAs to help you capture and understand the most elusive signals in an increasingly complex signal environment. Coupled with 160 MHz of wideband analysis bandwidth, the MXA allows you to make accurate analysis of next-generation wireless communications and connectivity signals.

The N9020A MXA signal analyzer is a member of the X-Series spectrum analyzers, which is an evolutionary approach to signal analysis that spans instrumentation, measurements and software. It gives you the flexibility to satisfy your business and technical requirements across multiple products and programs – now and in the future.

Key Features & SpecificationsFunctionality – See the latest enhancements10 Hz to 3.6, 8.4, 13.6, or 26.5 GHz; internal preamplifier options up to 26.5 GHz

• 25 MHz (standard); 40, 85, 125 or 160 MHz analysis bandwidth
• Fast sweep capability ships standard with new instruments (requires Option B40 or DP2 or MPB)
• Real-time spectrum analyzer capabilities with 100% probability of intercept for signal duration as short as 3.57 µs

Performance±0.23 dB absolute amplitude accuracy

• -114 dBc/Hz phase noise at 10 kHz offset; +20 dBm third order intercept (TOI)
• -166 dBm displayed average noise level (DANL) with preamplifier
• -78 dB W-CDMA ACLR dynamic range (with noise correction on)

OPTIONS:

• N9020A-WXP:  XP Operating system with option ssd the solid state hdd which is a must for load speed!
• N9020A - N9060A-2FP - SPEC ANALYZER MEASUREMENT APP
• N9020A - N9060A-3FP - AMPLITUDE CORRECTION AND LIMIT LINES
• N9020A - N9060A-4FP - TOI AND HARMONICS

For more opts check the pics!

• N9020A - N9060A-5FP - ACP 18 CARRIER MEASUREMENT
• N9020A - N9060A-6FP - TV TRIGGER AND IQ ANALYZER ENHANCEMENT
• N9020A - N9060A-7FP - ZERO SPAN, REGISTER, TRACE, AND SPURIOUS ENHANCEMENTS
• N9020A - N9071A - GSM/EDGE/EDGE EVOLUTION MEASUREMENT APPLICATION
• N9020A - N9073A - W-CDMA/HSPA/HSPA+ MEASUREMENT APPLICATION
• N9020A - N9080A - LTE-FDD MEASUREMENT APPLICATION

UPGRADED TO SSD: As shown it has a brand new 500 Gb SSD installed so it boots up way faster!. This Unit includes Portable Handle. We have both Bench and Portable Units available.

FULLY Refurbished and Calibrated with NEW lcd upgraded backlit lcd screen! Its much brighter , more contrast and overall better than the original one!!!!

We upgrad all our units to ssds which load much faster and respond quicker , cleaned keypads, rebuilt attenuators for preventitive maintenance.

FULL NIST CALIBRATION: Good for 2years.

These Units are superior to the e444xa series because the self calibrations are so well done it even calibrates its yig filter for the high band and has 2 cal reference signals: one for low and one for high band at 4.8 ghz! This way you always have accurate flatness and preselect tuning after running user cals! This one also has a cool option called user freq standard adjust so no more needing to send it into agilent like you have to do with the e444xa series predecessor to align the 10 mhz reference!

The mxa series has all the great things you love from the earlier models like performance and measurement capabilities but in a much more compact lightweight design that even without a front handle or rubbers, its still super portable and fits on the bench with ease and tons of extra room!

ABOUT US:

For Over 20 Years, Test CAL Instruments has been major player in the electronic test equipment industry on the West Coast. Located in the LA/OC area Of California, We Specialize in Sales, repairs, modifications, calibrations, parts, refurbishing of All Test Equipment.

We specialize Spectrum Analyzers, Optical Spectrum Analyzers and Signal Generators. We have NIST traceable Calibration capabilities for these items.

You will not find another dealer quite like us who repairs, refurbs and calibrates what we sell. We back all sales up with repairs at our cost when out of warranty and repairs or exchanges when / if you ever have a problem!

 WE SHIP WORLD-WIDE!

Ask us about International Shipping. We offer International Shipping by FEDEX. We can also ship on your DHL or UPS Account. We DO NOT USE eBay shipping for International Orders as eBay will only insure items for up to $1000. Because of this Shipping price vary, Please contact us to determine your Best Price.

Also note that eBay now charges a 2% surcharge for International Orders PLUS a currency Exchange Fee… which we must reluctantly pass on. Please contact us in advance to get a Final price for your order!